Table of Contents
Advertisement
Technical Specification
B.1.2.2
MPEG Audio
The RX8000 Integrated Receiver/Decoder supports decoding of MPEG audio as
follows:
•
•
•
B.1.2.3
Dolby Digital AC-3 Audio
The RX8000 Integrated Receiver/Decoder is able to decode and output the primary
stereo pair of a Dolby Digital AC-3 encoded audio stream. When there is data
encoded on the audio surround channels, the Decoder applies downmixing, so that
either a surround encoded stereo pair (LtRt downmix) or a conventional stereo pair
(LoRo downmix) is available at the output.
The RX8000 Integrated Receiver/Decoder is able to decode and output all 5.1
channels individually as separate channels:
•
•
Note: Support for Dolby Digital decoding requires approval and licensing from
B.1.2.4
AAC Audio
The receiver is capable of decoding and outputting as per specifications:
•
•
B.1.2.5
Linear Audio
The receiver is capable of pass-thru of linear (LPCM) audio and output via the AES3
digital output.
The receiver supports sample resolutions of 16, 20 or 24 bits.
B.1.2.6
Audio Output General
The RX8000 Integrated Receiver/Decoder provides an independent stereo pair
output for each audio channel. Analogue audio is always output and the following
digital audio formats can be chosen from the User Interface and remote control
interfaces:
•
B-12
Compression layers: MPEG-1 layers I and II
Sampling rate: 48 kHz
Maximum compressed data rate: 384 kbps (layer II)
Sampling rate: 48 kHz
Maximum compressed data rate: 640 kbps
Dolby.
For MPEG-2 AAC Audio ISO/IEC 13818-7
For MPEG-4 AAC Audio ISO/IEC 14496-3
AES3 format
EN/LZT 790 0005 R7A
Advertisement
Table of Contents
