Table of Contents
Advertisement
Using the Equipment
This status field reports the total number of MPE packets processed so that they can
be converted for IP output.
3.17.6.6.7
IP Out Link 1 > MPE Enable
This field enables or disables the data being output on IP Output Port 1.
Note: The RX8000 is only capable of outputting one MPE stream, if both ports are
3.17.6.6.8
IP Out Link 1 > MPE Packets Out
This status field reports the total number of data packets being output on IP Output
Port 1.
3.17.6.6.9
IP Out Link 1 > Link Status
This status field reports the link status of the port. MPE is a connectionless
broadcast so the link status does not indicate if the IP contents of the MPE packets
have been successfully received.
•
•
•
•
3.17.6.6.10
IP Out Link 2 > MPE Enable
This field enables or disables the data being output on IP Output Port 2.
Note: The RX8000 is only capable of outputting one MPE stream, if both ports are
3.17.6.6.11
IP Out Link 2 > MPE Packets Out
This status field reports the total number of data packets being output on IP Output
Port 2.
3-328
selected then the same stream will be output on both ports.
10 Mb
100 Mb
1000 Mb
Down
selected then the same stream will be output on both ports.
EN/LZT 790 0005 R7A
Advertisement
Table of Contents
