Table of Contents
Advertisement
Input
Input MER level
Frequency range
Channel bandwidth
B.2.8
Frame Sync Connector
The receiver can frame lock to an external video source. The frame information is
input as a composite synchronous signal, with or without active video. The user can
offset the sync to the video output by ±32,000 HD pixels, with a resolution of one
pixel.
It is possible to connect multiple receivers to the same reference signal. This input
requires an external 75 Ω termination.
Table B.30 Frame Sync Connector
Item
Safety status
Connector type
Connector designation
Pin:
B.3
Output Specifications
B.3.1
Video Outputs
See:
Table B.3
Table B.4
Composite Video Output,
Table B.5
Table B.8
B.3.2
Audio Outputs
See:
Table B.10
EN/LZT 790 0005 R7A
Specification
6 – 36 dB
UHF 470 – 862 MHz
VHF 174 – 230 MHz
6, 7 and 8 MHz
Specification
SELV
BNC, female
Frame Sync
Centre
Analogue black and burst input
Shield
Ground/chassis
625 Line
525 Line in 0 * Preliminary figures
HD Analogue Output Specification in B.1.1.5 Analogue HD Video Output
Digital Video Output Connectors in B.1.1.6 SD SDI Digital Video
Analogue Audio Performance Specifications in B.1.2.7 Analogue Audio.
Technical Specification
, subject to characterization.
B-27
Advertisement
Table of Contents
