Upgrading The Rx8330C With Signed Application Code - Ericsson RX8000 Reference Manual

•
•
•
•
3.11.8.5.1

Upgrading the RX8330C with Signed Application Code

The application code on the RX8330C is signed and is checked by the boot loader
during initialization. Therefore, great care should be taken when upgrading the unit.
Traditionally, the RX8000 range of IRDs may use a file called Main.bin to upgrade
the IRD via FTP. For the RX8330C, this file needs to be signed and so may be
called Main.bin.sig.
Note: Existing RX8000 software versions named Main.bin or main.bin.sig code
Other than the software image, the upgrade process is identical to that already
described in the release notes.
3.11.8.5.2 XPO Password Protection
XPO Password Protection forces the user to enter a username and password in
order access and configure the IRD through the web browser interface. This feature
is permanently enabled on the RX8330C and cannot be disabled due security
reasons.
The default is:
Once access has been granted, it is recommended that the XPO password is
changed. This can be changed by navigating to the Device Info > XPO Password
Protection option:
Figure 3.80 XPO Password Protection Dialog Box
EN/LZT 790 0005 R7A
Serial and Telnet logging and debug features are not supported.
SNMP is not supported.
Service Plus functionality is not supported.
Multi-service descrambling is not supported.
versions that are not release version 10.x.x must NOT be downloaded to the
RX8330C. This will be rejected by the boot loader, and if both flash banks
contain invalid / rejected code then the IRD cannot be recovered.
User Name: username
Password: password
Using the Equipment
3-173