Using the Equipment
Figure 3.55 Input Web Page (G.703 ATM Input Card Fitted)
Input
•
•
•
•
•
•
•
•
•
•
•
3-102
Input Source – Enables a choice of Source Selection from the drop-down
menu.
Primary Input – Enables selection of the Primary input to the IRD.
Input Loss Switch Period – Enables the user to define a period (in seconds)
before the unit switches to the alternate input (either Input Source or Primary).
Current Input – Displays the currently locked input.
TS Lock – Displays the lock status of the Transport Stream input.
TS Bit Rate – Displays the bit rate of the Transport Stream input (in Mbps).
Packet Length – Displays the packet length used in the Transport Stream.
ASI Status – Status of the ASI input option. This is not the same as the
motherboard lock status.
G.703 – Displays the lock status of the G.703 card. This is the value sent from
the G703 option card and is not the same as the motherboard lock state.
Return to Primary – Checking this box specifies that when the Primary is
locked the unit will always return to the Primary after a timeout period, defined
below.
Primary Lock Switch Period – Enables the user to define a period, in minutes,
before switching back to Primary, if Primary is not currently selected.
EN/LZT 790 0005 R7A