Scte 35 Splice Message Decode Support - Ericsson RX8000 Reference Manual

Using the Equipment
•
3.17.4

SCTE 35 Splice Message Decode Support

All variants of the RX8000 support SCTE 35 (Digital Program Insertion Cueing
Message for Cable) that contain Splice commands intended for notifying a splicer of
splice events. It is designed to accommodate advert insertion in and out of network
feeds.
3.17.4.1 Availability
 = Option
Splice
3.17.4.2 Order Items
Option Name
There are no order items with this functionality
3.17.4.3 Control

3.17.4.4 License Keys
Marketing Code
There are no license keys associated with this input type
3.17.4.5 Functional Description
SCTE 35 defines a mechanism for signaling splice points in the transport stream.
The RX8200 can process SCTE 35 splice information to control two contact
closures, one signaling network Out Point and other signaling network In Point. Also,
the RX8000 can convert SCTE 35 in to SCTE 104 for insertion in VANC.
3.17.4.5.1 SCTE 35 Splice Messages
A number of Splice commands are defined within SCTE 35 but only the following
commands are parsed by the RX8000, all others are silently ignored:
3-314
Teletext Subtitle PID – Displays the Packet Identifier of the Teletext PES
stream associated with the currently selected service if the Enable Teletext
Subtitles option is enabled.
B = Supplied with Base Model
B
Card Number

Description
B B B B
FAZ Number
FAZ Number
B B B B
Marketing Code
License Key Name
EN/LZT 790 0005 R7A