Alarm Identifiers
Name
MSF Invalid Operation
MSF Overrate Protection Limit
High TS Output Buffer
Bit rate Search ACTIVE
C.2.9
Down Conversion Alarm Identifiers
Table C.9 Down Conversion Alarm Identifiers
Name
Down-converter FW Error
Unsupported Video Format
C.2.10
Miscellaneous Input Alarm Identifiers
Table C.10 Miscellaneous Input Alarm Identifiers
Name
SNR
C/N Margin
G.703 Input Option Card Alarm
DVB-T2 Temperature
DVB-T2 Software Error
DVB-T2 MER
DVB-T2 BER
DVB-T2 Power
C-6
Identifier
Description
1062
Invalid configuration of the Multi-
Service Filter via SNMP such as the
case where the Single Filter Service
Slaved to Decode option is enabled.
1063
Packet buffer is nearly full and the
output rate has been raised to 200
Mbps. This only occurs when the
Buffer Overrate Protection mode is
enabled.
1064
Service Filter buffer is high and has
exceeded 85% full.
1065
The search minimum bit rate function
is active and will affect the output bit
rate on a live system.
Identifier
Description
1070
Failure on the High Quality down-
conversion option card
1071
The output video resolution is not
supported by High Quality down-
conversion option card
Identifier
Description
1080
Signal/Noise Ratio below threshold on
ATSC 8VSB input
1081
Carriage/noise margin below threshold
on DVB-S2 Satellite input
1082
General alarm from G.703 input
1083
Over temperature
1084
General error
1085
MER threshold
1086
BER threshold
1093
Diagnostics
EN/LZT 790 0005 R7A