Ericsson RX8000 Reference Manual page 234

Using the Equipment
•
•
•
•
•
•
3-194
- HEVC
Aspect Ratio – Displays the incoming aspect ratio, this is supplied by the video
sequence header information within the Transport Stream. This is not the output
aspect ratio (This is defined by the Screen Aspect Ratio menu option). This
can have the values:
- UNKNOWN
- 16:9
- 4:3
- 221:1
- SQUARE
- EXTENDED
Frame Rate – Displays the incoming frame rate, this is supplied by the video
sequence header information, this will be the same as the output frame rate
because this unit does support frame-rate conversions. This can have the
values:
- 23.976
- 24
- 25
- 29.97...
- 30
- 50
- 59.94...
- 60
Resolution – Displays the incoming resolution, this is supplied by the video
sequence header information notably the horizontal_size and vertical_size, this
may not be the same as the output resolution if down or up conversion features
have been enabled.
Bit Rate – Displays the input video bit rate (in Mbps) detected by demux
process for the PID supplied to the video decoder.
Scan Type – Displays the scan type detected by the unit, this is derived from
the resolution and frame rate provided in the sequence header information.
Color Type – Displays the color type as defined in the chroma_format in the
sequence extension of the video stream, this can have the values:
- 4:2:0
- 4:2:2
EN/LZT 790 0005 R7A