4:2:2 Decoder Card Alarm Identifiers; Dvb-S2X Input Alarm Identifiers - Ericsson RX8000 Reference Manual

Alarm Identifiers
C.2.12

4:2:2 Decoder Card Alarm Identifiers

Table C.12 4:2:2 Decoder Card Alarm Identifiers
Name
TS not locked on 422 card
Decoder not ready on 422 card
Decoder error on 422 card
Code version error on 422
card
C.2.13

DVB-S2X Input Alarm Identifiers

Table C.13 DVB-S2X Input Alarm Identifiers
Name
SAT S2X Invalid License
SAT S2X Self-Test Fail
SAT S2X No Input Detected
SAT S2X Over Temperature
C-8
Identifier Description
1400 The 4:2:2 Decoder card does not
detect an incoming Transport Stream
for decode.
Not supported by the MPEG-2 4:2:2
Decoder Card (First Generation).
1401 The 4:2:2 Decoder is in a reset state
and currently not ready for video
decode.
Not supported by the MPEG-2 4:2:2
Decoder Card (First Generation).
1402 Decoding errors detected by the 4:2:2
Decoder card.
Not supported by the MPEG-2 4:2:2
Decoder Card (First Generation).
1403 Activated when the code version
loaded on the 4:2:2 Decoder Option
card is not compatible with the
motherboard code version.
As of motherboard code version 7.14.0
onwards, the minimum supported code
version for the Third Generation 4:2:2
Decoder Option card is 3.0.
Identifier Description
1408 This alarm is raised if there is a license
error reported by the DVB-S2X card or
the modulation standard of the locked
signal is not licensed.
1409 After power-on or reset, the device
performs an internal self-test. If this
self-test fails it will trigger this alarm.
1410 This alarm is raised if any one of the
input related alarms on the DVB-S2X
card is raised.
1411 This alarm is raised if the internal
temperature of the DVB-S2X card is
outside its operating specification.
EN/LZT 790 0005 R7A