Table of Contents
Advertisement
Technical Specification
Parameter
Phase @ 0 dB
(40 Hz – 15 kHz)
B.1.2.8
Audio Routing
The RX8000 Integrated Receiver/Decoder supports the following routing of audio
signals:
•
•
•
•
When the input signal is STEREO, the Audio digital output format will always be
STEREO.
Where a dual mono service is available, it is possible to configure the output as
MIXED TO BOTH, LEFT TO BOTH and RIGHT TO BOTH.
B.1.2.9
Lip Sync
The audio at the output remains synchronous to the decoded video by default (i.e.
where both video and audio streams are available from the same service). In such
circumstances the video and audio streams share the same PCR.
The lip sync error (delay from presentation of video until presentation of audio)
introduced by the Receiver is in the range of ±5 ms.
The lip sync delay between different stereo pairs is ±2 ms because the PTS will be
presented independently for each pair.
B.1.2.10
Supported Audio Specifications
Table B.11 Supported Audio Specifications
Specification
ISO/IEC 13818
ATSC A-52
SMPTE302M
B-14
STEREO (Channel 1 left, Channel 2 right).
MIXED TO BOTH (Channel 1 and 2 on left and right).
LEFT TO BOTH (Channel 1 on left and right).
RIGHT TO BOTH (Channel 2 on left and right).
Description
Generic Coding of Moving Pictures and Associated Information:
(MPEG-2) Audio.
Digital Audio Compression Standard (Dolby Digital).
Linear Audio
Specification
+/- 2 degrees
EN/LZT 790 0005 R7A
Advertisement
Table of Contents
