Loading Paper Into The Bypass Tray - Develop ineo+ 360i Quick Manual

6.2 Loading paper
3
Load paper into the tray with the print side facing up.
4
When loading paper other than plain paper, specify the paper type as needed.
% The paper type is automatically detected by the optional Intelligent media sensor.
% If you make settings so that the paper type is not automatically detected, you need to specify the
paper type.
% For details on how to specify the paper type, refer to the HTML User's Guide.
6.2.2

Loading paper into the Bypass Tray

When selecting a paper size other than for paper trays or printing on envelopes or transparencies, use the
Bypass Tray.
To use the Bypass Tray, specify the paper type and paper size.
Applicable paper types
Plain paper, single-side-only paper, special paper, thick paper, postcard (4 e 6 (A6 Card)), transparency, let-
terhead, colored paper, envelope, label sheets, index paper, recycled paper, and banner paper
How to load paper
1
Open the Bypass Tray.
% To load large-sized paper, pull out the Tray Extension.
NOTICE
Be careful not to touch the surface of the Paper Feed Rollers with your hand.
ineo+ 360i/300i/250i
6
6-5