Selecting Ring Tone - AudioCodes 440HD User Manual

4.2

Selecting Ring Tone

You can choose from a selection of ring tones to indicate incoming calls

To select a ring tone:
1. Access the Ring Tone screen (MENU key > Settings > Ring Tone).
2. Navigate to and select a ring tone. A sample of each ring tone is played as you navigate
through the list.
3. Set ring tone volume by pressing the VOL
A few seconds after adjusting the volume level the Ringer Volume indication is hidden.
4. Press the Select softkey to apply your settings.
5. Press the Save softkey to save your settings.
User's Manual
or VOL key:
30
430HD and 440HD IP Phone
.
Document #: LTRT-11937