Placing Calls On Hold; Calling A Contact Listed In The Directory; Using A Speed Dial To Place A Call - AudioCodes 440HD User Manual

6.2

Placing Calls On Hold

You can place a call on hold in order to answer an incoming call (see Section
to make another call. The party put on hold will hear music played (Music on Hold (MOH)).

To place a call on hold:
Accept an incoming call and then press the HOLD key on the keyboard or press the Hold

softkey; the call is put on hold:

To retrieve a call on hold:
Press the HOLD key again -OR- press the Resume softkey.

Note: When using the handset in a call, if the handset is on-hooked after putting the call on
hold, the call is not disconnected and the audio is switched to the speaker. For the call to be
disconnected, as it was in earlier versions, refer to your network administrator.
6.3

Calling a Contact Listed in the Directory

This section shows how to call a contact listed in your directory.

To call:
1. Press the CONTACTS key on the keyboard, navigate to Personal directory, and press the
Select softkey to access it.
2. Navigate to a contact to call (see also Section
3. Press the Dial softkey or the OK key.
6.4

Using a Speed Dial to Place a Call

You can press a Function Key or a Programmable Key, that you defined as a Speed Dial, to
quickly place a call. To define a Function Key as a Speed Dial, see Section 4.16. To define a
Programmable Key as a Speed Dial, see Section 4.17.

To place a call using a Speed Dial:
Press a Function Key (1-12 on the right side of the phone) that you defined as a Speed Dial;

the phone dials the defined contact's number -OR-
Press a Programmable Key (the six flanking the LCD with the exception of the uppermost left

key) that you defined as a Speed Dial; the phone dials the defined contact's number.
Note: If you haven't defined Function Key #8 (for example) as a Speed Dial and you press it,
the LCD displays the Function Key #8 screen enabling definition. If you haven't defined a
Programmable Key and you long-press it, the Line Key screen is displayed enabling
definition. See Section
User's Manual
4.16 and Section 4.17.
66
430HD and 440HD IP Phone
4.14.5 on page 45).
Document #: LTRT-11937
6.1 on page 65) or