Selecting Ring Tone - AudioCodes 420HD User Manual

http://arttel.ru
5.2

Selecting Ring Tone

You can choose from a selection of ring tones to indicate incoming calls.
¾
1.
2.
3.
A few seconds after adjusting the volume level the Ringer Volume indication is hidden.
4.
5.
User's Manual
http://arttel.ru/shop/ip-telefony/ip-telefon-audiocodes-420hd
To select a ring tone:
Access the Ring Tone screen (MENU key > Settings > Ring Tone).
Navigate to and select a ring tone. A sample of each is played as you navigate through the
ring tones.
Set ring tone volume by pressing the VOL
Press the Select softkey to apply your settings.
Press the Save softkey to save your settings.
420HD IP Phone with Microsoft Lync
or VOL key:
26 Document #: LTRT-11896