Selecting Ring Tone - AudioCodes 445HD User Manual

6. Customizing Your Phone
6.2

Selecting Ring Tone

You can choose from a selection of ring tones to indicate incoming calls.
To select a ring tone:
1. Open the Ring Tone screen (MENU hard key > Settings > Ring Tone).
2. Navigate to and select a ring tone (a sample of each ring tone is played as you navigate
through the list).
3. Set ring tone volume by pressing the VOL
A few seconds after adjusting the volume level the Ringer Volume indication is hidden.
4. Press the Select softkey to apply your settings.
5. Press the Save softkey to save your settings.
To assign a ring tone per line extension:
1. Open the Ring Tone screen (MENU hard key > Settings > Ring Tone).
2. Navigate to and select the line extension for which to configure a ring tone.
3. In the Ring Tone screen that opens, select the ring tone of your choice and then press the
Save softkey.
or VOL key:
- 24 -
445HD IP Phone