Defining Programmable Key #6 As A Vocanom Speed Dial; Deleting The Key Event - AudioCodes 440HD User Manual

User's Manual
6. Press the Save softkey; the LCD reverts to idle mode displaying the 'Dialed' Key Event you
defined ('Dialed', in this example):

4.20.1 Defining Programmable Key #6 as a VocaNOM Speed Dial

You can configure programmable key #6 as a VocaNOM speed dial for quicker and friendlier
voice dialing ability.

To configure VocaNOM Programmable Key #6:
1.
Long-press the sixth Programmable Key located to the right of the LCD below the fifth
and fourth keys; the Programmable Key screen is displayed in the LCD with VocaNOM
by default selected.
2. Press the Select softkey and then enter the VocaNOM Number and press the Save
softkey; VocaNOM is displayed in the phone LCD. The figure below shows the
VocaNOM programmable key indicated in the 440HD phone. The figure below it shows
the VocaNOM programmable key indicated in the 440+HD model.

4.20.2 Deleting the Key Event

This section shows how to delete a Programmable Key defined as a Key Event.

To delete a Programmable Key defined as a Key Event:
1. Long-press the Programmable Key until this screen is displayed:
2. Press the navigation control's left or right rim to navigate to and select Empty; you're
returned to the idle LCD; the Programmable Key is removed.
Version 2.0.13B 55
4. Customizing Your Phone
430HD and 440HD IP Phone