Signing In - AudioCodes 440HD User Manual

3.5

Signing In

This section shows how to sign in with the default sign-in method.
Note:
• The default sign-in method, presented in the phone's LCD, is with the phone number and
the PIN code, provided by your IT administrator.
• You can switch from this default sign-in method and sign in instead with address, user
name and user password.
• If you switch to the latter method and then sign out, this method will be presented the next
time you sign in.

To sign in with the default sign-in method:
1. In the idle LCD, press the Sign in softkey on the device; the LCD displays the Sign in
screen:
2. Enter your phone number.
3. Navigate down with the lower rim of the navigation control button and then enter your PIN
code. You can get it from your IT administrator. To switch from numbers to alphabetical
letters and symbols, see Section Error! Reference source not
4. Press the Sign-in softkey; the phone is signed in and the idle screen is displayed.

To change the default sign-in method and sign in with User Name and Password:
1. In the Sign in screen, scroll down using the navigation control button and then select Switch
sign-in method; the address, User Name and User Password method is presented.
2. Enter your SIP URI. To switch from letters of the alphabet to symbols such as @, - and
period, see Section
3. Navigate down to User Name and enter your domain name, backslash, and User Name:
4. Navigate down to Password:
User's Manual
3.4 below.
22
430HD and 440HD IP Phone
found..
Document #: LTRT-11937