Adjusting Volume; Adjusting Ring Volume; Adjusting Tones Volume - AudioCodes 440HD User Manual

3. In the 'Proxy Address' field enter the hosted service provider's domain name (FQDN).
4. Navigate down to the 'Port' field, configure the port (default = 0), and then press the Save
softkey.
4.12

Adjusting Volume

You can adjust the volume of the phone's:
Ring

Tones (e.g., dial tone)

Handset

Speakerphone

Headset


4.12.1 Adjusting Ring Volume

You can adjust the volume of the ring indicating an incoming call.

To adjust ring volume:
1. When the phone is in idle state (i.e., not in use), press the VOL
Ringer Volume bar is displayed on the screen:
2. Press the VOL
Ringer Volume level disappears from the screen.

4.12.2 Adjusting Tones Volume

You can adjust the phone tones, including dial tone, ring-back tone and all other call progress
tones.

To adjust tones volume:
1. Off-hook the phone (using handset, speaker or headset).
2. Press the VOL
User's Manual
or VOL key on the keypad to adjust the volume. After adjusting, the
or VOL keyboard key; the Tones Volume bar displays on the screen:
40
430HD and 440HD IP Phone
or VOL key; the
Document #: LTRT-11937