6.1.4.2
Connecting the IP Phone with the BToE PC Application
This section shows how to connect the IP phone with the BToE PC application.
To connect the two:
1.
Open the AudioCodes BToE Connect screen: Click the BToE client icon placed on your
taskbar after installation; the following popup menu opens.
2.
Select the Phone Pairing option
3.
In the 'Type the pair code' screen, enter the pair code that you generated as shown in
Section 6.1.4.1; the OK button is activated after 8 characters are entered.
3.
Click the OK button; BToE is activated.
4.
If a communication error occurs or the wrong pair code was entered, the following icon
indication appears:
5.
When BToE is successfully connected, view the following icon indication:
6.
When BToE is in 'Connected' state, the popup menu shows the Disconnect
and the Phone Pairing menu item is deactivated:
User's Manual
Figure 6-18: Popup Menu
Figure 6-19: Phone Pairing
Figure 6-20: AC BToE Failed Indication
Figure 6-21: AC BToE is Connected Indication
80
430HD and 440HD IP Phone
menu item
Document #: LTRT-11937