Selecting Ring Tone - AudioCodes 440HD User Manual

400hd series of high definition ip phones, hd voip
Hide thumbs Also See for 440HD:
Table of Contents

Advertisement

4.2

Selecting Ring Tone

The phone provides a selection of ring tones that you can choose from to indicate incoming calls.
If line extensions are defined on your phone, you can assign a ring tone per line extension.
To select a ring tone:
1.
Access the Ring Tone screen (MENU key > Settings > Ring Tone).
2.
In the Ring Tone screen select All Extensions, or select a specific extension (if extensions
are configured) and then select a ring tone. A sample of each ring tone is played as you
navigate through the list.
3.
Press VOL
decrease ring tone volume when the phone is in idle state or when a call is incoming (see
Section 4.10.1).
A few seconds after adjusting the volume level the Ringer Volume indication is hidden.
4.
Press the Select softkey.
5.
Press the Save softkey to apply your setting.
User's Manual
or VOL
on the keypad to set ring tone volume. You can also increase or
28
430HD and 440HD IP Phone
Document #: LTRT-11928

Advertisement

Table of Contents
loading

This manual is also suitable for:

430hd

Table of Contents