Selecting Ring Tone - AudioCodes 450HD User Manual

5.2

Selecting Ring Tone

You can choose from a selection of ring tones to indicate incoming calls

To select a ring tone:
1. Open the Ring Tone screen (MENU hard key > Settings > Ring Tone).
2. Navigate to and select a ring tone. A sample of each ring tone is played as you navigate
through the list.
3. Set ring tone volume by pressing the VOL
A few seconds after adjusting the volume level the Ringer Volume indication is hidden.
4. Touch the Select softkey to apply your settings.
5. Touch the Save softkey to save your settings.
User's Manual
or VOL key:
38
450HD IP Phone
.
Document #: LTRT-14820