Rear View; Figure 2-2: Rear View; Table 2-2: Rear View Description - AudioCodes 440HD User Manual

User's Manual
Item # Label/Name
9 REDIAL
10 Kensington lock
11 TRANSFER
12 HOLD
13
Alphanumerical
Keypad
14 Microphone
15 SPEAKER
16 HEADSET
17 MUTE
▲ VOL
18
▼ VOL
19 x
20 ---
2.2.2

Rear View

The rear view of the phone is shown in the figure below and described in the table below.
# Label
1
2
3
4
5
Version 2.0.13B
Accesses a list of recently dialed numbers; one can be selected to redial.
Allows locking the device.
Transfers a call.
Places an active call on hold.
Keys for entering numbers, alphabetical letters and symbols (e.g., colons)
Allows talking and listening. IT managers can disable it if required.
Activates the speakerphone, allowing a hands-free conversation.
Activates a call using an external headset.
Mutes a call.
Increases or decreases the volume of the handset, headset, speakerphone,
ring tone and call progress tones.
Cancel an action, such as dialing a number, after beginning it.
Programmable keys, located on each side of the LCD, to which you can
assign functions.

Figure 2-2: Rear View

1
2

Table 2-2: Rear View Description

Handset jack, i.e., RJ-9 port, to connect the handset.
RJ-45 port to connect to the Ethernet LAN cable for the LAN connection
(uplink - 10/100/1000 Mbps). If you're using Power over Ethernet (PoE),
power to the phone is supplied from the Ethernet cable (draws power
from either a spare line or signal line).
RJ-45 port to connect the phone to a PC (10/100/1000 Mbps downlink).
12V DC power jack that connects to the AC power adapter.
Headset jack, i.e., RJ-9 port that connects to an external headset.
Description
3 4
Description
13
2. Setting up the Phone
5
430HD and 440HD IP Phone