Softkeys; Table 3-2: Softkeys - AudioCodes 440HD User Manual

3.2

Softkeys

The table below describes softkeys displayed in the LCD according to menu level currently
accessed. To use a softkey, press the key located on the device directly below it.
Softkey Description
Missed Displays missed calls.
Forward Defines and activates call forwarding.
Status Displayed in idle state. Activates presence status (Available, Busy, Do not disturb, Away, Be
right back, Reset).
Sign in
The 'Sign in' softkey is only displayed in the idle screen if you haven't signed in yet.
/Sign out
The 'Sign out' softkey is only displayed after pressing the 'Status' softkey after signing in.
Opens the phone's Directory. Lets you select a contact in the Corporate directory or
Personal directory. Displayed in idle state. Also displayed (for example) after lifting the
handset and after selecting
Select Selects a menu or menu option. Identical to the OK key (either can be used).
BToE Generates a pairing code to use when setting up Better Together over Ethernet.
A/a/1 Enables switching between input modes: abc, ABC, Abc, or numbers.
Save Saves settings.
Cancel Cancels the currently initiated call or configuration.
Dial Displayed after a number is keyed, a directory contact is selected, or a logged call is selected.
Dials the phone number / directory contact / logged call.
Clear Displayed (for example) after entering a digit of a phone number. Deletes from right to left.
Displayed after a number is dialed and the call is answered on the other side. Also shown after
you answer a call. Accesses the New Call / Transf screen in which you can key a number or
URL.
Conf Displayed after a number is dialed and the call is answered on the other side. Also shown after
you answer a call. Accesses the NEW CALL screen in which you can key a number or URL.
Transf. Displayed after a number is dialed and the call is answered on the other side. Also shown after
a call is answered. Enables keying a number or URL to transfer the call to.
URL Displayed after lifting the handset, after pressing
pressing Conf, and after keying the
Displayed after lifting the handset. Also displayed after New Call / Trans or Conf is selected.
Presents menu items All Calls, Missed Calls, Received Calls, Dialed Calls.
Detail Displayed (for example) after selecting a Call Log submenu: All Calls, Missed Calls,
Received Calls or Dialed Calls. Displays the submenu's details (Time, Date, etc.).
End Displayed for example after pressing the Dial softkey and when the called party lifts the
handset/accepts the call. Also displayed after accepting an incoming call or lifting the handset
to answer. Ends the call.
Back Displayed for example after pressing the MENU key as well as after selecting any of the
submenu's under it. Returns you to the previous screen state or menu level.
Start Displayed after pressing Forward > selecting an extension line to which to forward.
Activates call forwarding.
Edit Displayed after you select a contact (for example) to be edited.
Displayed after pressing the MENU key > selecting Call Log softkey > selecting submenu All
Delete
Calls, Missed Calls, Received Calls or Dialed Calls) > pressing the Detail softkey. Before
deleting a call item, a warning prompt is displayed.
User's Manual

Table 3-2: Softkeys

> New Call / Trans, or Conf (see below).
and selecting New Call / Trans, after
key. Enables calling a URL.
18
430HD and 440HD IP Phone
Document #: LTRT-11937