Selecting Ring Tone - AudioCodes 405 User Manual

4.2

Selecting Ring Tone

The phone provides a selection of ring tones that you can choose from to indicate incoming calls.
If line extensions are defined on your phone, you can assign a ring tone per line extension.

To select a ring tone:
1. Access the Ring Tone screen (MENU key > Settings > Ring Tone).
2. In the Ring Tone screen, select All Extensions, or select Extension 1 or Extension 2 (if
extensions are configured).
3.
Navigate to a ring tone of your choice. A sample of each ring tone is played as you navigate
through the list.
4.
Press the
decrease ring tone volume when the phone is in idle state or when a call is incoming (see
Section 4.9.1).
A few seconds after adjusting the volume level, the Ringer Volume indication is hidden.
5. Press the Select softkey.
6. Press the Save softkey to apply your setting.
User's Manual
- or + key on the keypad to set ring tone volume. You can also increase or
24
405 and 405HD IP Phone
Document #: LTRT-12045