User's Manual
4.5
Setting Date and Time
Date and time is automatically retrieved from the deployed Network Time Protocol (NTP) server,
enabled by your administrator.
To enable the NTP server:
1.
Access the Date and Time screen (MENU key > Settings > Date and Time).
2.
If not already 'Enabled', notify your network administrator.
To configure the Time Zone:
1.
Navigate to the Time zone option and press the Select softkey.
2.
Navigate to and select the time zone relevant to your geographical location. See
below for a list of all Time Zone options.
To configure the time format:
1.
Navigate to the Time format option and press the Select softkey.
2.
Navigate to the format of your choice and press the Select softkey.
Note:
To configure the NTP server, see the Administrator's Manual.
Version 2.0.13B
33
4. Customizing Your Phone
Table 4-1
430HD and 440HD IP Phone