Selecting Ring Tone - AudioCodes 420HD User Manual

4.2

Selecting Ring Tone

The phone provides a selection of ring tones that you can choose from to indicate incoming calls.
If line extensions are defined on your phone, you can assign a ring tone per line extension.

To select a ring tone:
1. Access the Ring Tone screen (MENU key > Settings > Ring Tone).
2. In the Ring Tone screen, select All Extensions, or select Extension 1 or Extension 2 (if
extensions are configured).
3.
Navigate to a ring tone of your choice. A sample of each ring tone is played as you navigate
through the list.
4.
Press the VOL
increase or decrease ring tone volume when the phone is in idle state or when a call is
incoming (see Section 4.9.1).
A few seconds after adjusting the volume level, the Ringer Volume indication is hidden.
5. Press the Select softkey.
6. Press the Save softkey to apply your setting.
User's Manual
or VOL key on the keypad to set ring tone volume. You can also
28
420HD IP Phone
Document #: LTRT-11889