Figure 3-4: Entering A Symbol (E.g., A Dot); Figure 3-5: Reverting To Letters (E.g., Abc) - AudioCodes 440HD User Manual

User's Manual

To enter a symbol (e.g., dot or @ or hyphen):
1. If you're not in lower case alphabetical mode, press the A/a/1 softkey and navigate to abc
(mandatory). You can also access the mode menu by pressing the # key on the keypad –
press the # key successively to navigate in the menu.
2. Press the 1 key on the keypad; a period / full stop is entered. Immediately press the 1 key
again; a backslash is entered. Pressing successively produces:
Symbol Explanation
. Dot
\ Backslash
@ At
; Semi-colon
: Colon
# Pound
$ Dollar
% Percentage
^ Caret
& Ampersand
! Exclamation mark
? Question mark
+ Plus
- Hyphen
_ Underscore
~ Approximates
Note that the asterisk (*) symbol is entered directly using the star key.

To revert to letters (e.g., abc):
Press the A/a/1 softkey (or the # key on the keypad) and navigate to abc mode.

Version 2.0.13B

Figure 3-4: Entering a Symbol (e.g., a dot)

Figure 3-5: Reverting to Letters (e.g., abc)

21
Symbol Explanation
* Star sign
= Equal sign
| Separator
( Open parenthesis
) Close parenthesis
{ Open parenthesis
} Close parenthesis
[ Open square parenthesis
] Close square parenthesis
" Double quotation marks
' Single quotation mark
> Greater than
< Less than
, Comma
/ Forward slash
3. Getting Started
430HD and 440HD IP Phone