Making Sure Ip Phone/ Skype For Business Client Are Paired; Making Sure Skype For Business Client Is Paired; Figure 6-26: Skype For Business Sign-In Request Prompt - AudioCodes 440HD User Manual

User's Manual
Note: Primary Device cannot be changed in Skype for Business Client PC client during a
call. When the phone is in idle mode (not in a call), the PC application must be disconnected
in order to change Primary Device. See the Release Notes.
6.1.6

Making Sure IP Phone/ Skype for Business Client are Paired

This section shows how to make sure you successfully paired your IP phone with the Skype for
Business client.
6.1.6.1

Making Sure Skype for Business Client is Paired

You can make sure the Skype for Business client is paired with the IP phone.

To make sure the Skype for Business client is paired with the IP phone:
1. In the Skype for Business client application, in the lowermost left corner of the screen, click
the Select Primary Device icon
2. Make sure Handset AudioCodes 400HD Phone is selected.
Note:
• When answering an incoming video call with a paired phone, the call is established. The
default device is the PC speaker/microphone rather than the phone. Subsequent audio
calls will be unaffected; the paired phone will still be the default device.
• In pairing mode, the user (Skype for Business PC client /phone) can perform up to two
concurrent calls (incoming/outgoing). See the Release Notes.
Version 2.0.13B

Figure 6-26: Skype for Business Sign-in Request Prompt

6. Performing Advanced Operations
; the following popup menu opens:
83 430HD and 440HD IP Phone