Agilent Technologies 89410A Service Manual page 9

Agilent 89410A Front Panel
1-A softkey's function changes as different menus are displayed. Its
current function is determined by the video label to its left, on the
analyzer's screen.
2
narrow column at the screen's right edge, displays softkey labels. The
data area, the remaining portion of the screen, displays traces and other
data.
3
4
work.
5
to the analyzer. The keyboard is most useful for writing and editing
Instrument BASIC programs.
6
DUT. Output impedance is selectable: 50 ohms or 75 ohms.
7
the analyzer.
8
various Agilent active probes.
9
to the analyzer's receiver. Input impedance is selectable: 50 ohms, 75
ohms, or 1 megohm.
10
trace data and to select display options for that data.
11
functions (online help, plotting, presetting, and so on).
12
analyzer's receiver and source, and to specify other measurement
parameters.
13
set up and monitor the activity of remote devices.
14
positioning and marker functions.
-The analyzer's screen is divided into two main areas. The menu area, a
-The POWER switch turns the analyzer on and off.
-Use a 3.5-inch flexible disk (DS,HD) in this disk drive to save your
-The KEYBOARD connector allows you to attach an optional keyboard
- The SOURCE connector routes the analyzer's source output to your
-The EXT TRIGGER connector lets you provide an external trigger for
-The PROBE POWER connectors provide power for
-The CHANNEL 1 input connector routes your test signal or DUT output
-Use the DISPLAY hardkeys and their menus to select and manipulate
-Use the SYSTEM hardkeys and their menus to control various system
-Use the MEASUREMENT hardkeys and their menus to control the
-The REMOTE OPERATION hardkey and LED indicators allow you to
-Use the MARKER hardkeys and their menus to control marker
ix