Agilent Technologies 89410A Service Manual page 75

c
If the analyzer has the optional second channel, repeat the
previous two steps for channel 2.
After pressing [Preset
[ch2 range] [ch1 range].
for
d
If a calibration curve is not within +2.5 dB and -1 dB of the range
level setting, go to page
calibrator out failures'' or
ADC failures.''
To troubleshoot intermittent failures
], press
[ B] [ Range] [channel 2]
page 1-62''To troubleshoot source and
page 1-71- ''To troubleshoot input and
Troubleshooting the Analyzer
and substitute
1-57