Master Tune; Transpose; Memory Card (Save, Load, Format, & Bank) - Yamaha SY35 Product Manual

Hide thumbs Also See for SY35:
Table of Contents

Advertisement

Summary: Tunes the overall pitch of the SY35 over
approximately a 100-cent range.
Settings:-50 ...0...+50
Procedure: Use the
the lower display line. Use the [-1/NO] and
[+1/YES] keys to set the desired degree of
tuning.
Summary: Transposes the overall pitch of the SY35
up or down in semitone steps.
Settings:-12 ...0...+12
MEMORY CARD (Save, Load, Format, & Bank)
Save
Summary: Saves all internal voice and multi-play
data to a memory card.
Settings: SAVE
Procedure: Use the
the lower display line, then use the [-1/NO] and
[+1/YES] keys to select "SAVE." Now press
the
key again and the "SAVE TO CARD?"
display will appear. Press the [+/YES] key to
start the save operation, or the [-1/NO] key to

MASTER TUNE

key to move the cursor to

TRANSPOSE

key to move the cursor to
Details: Tuning occurs in 3 or 4-cent steps. Since
100 cents equals one semitone, the overall tun-
ing range is approximately one semitone — i.e.
plus or minus a quarter tone. Plus settings tune
upward from normal pitch, and minus settings
tune downward. A setting of "0" produces nor-
mal pitch.
Procedure: Use the
the lower display line. Use the [-1/NO] and
[+1/YES] keys to set the desired degree of
transposition.
Details: A setting of "-12," for example, trans-
poses down by one octave; a setting of "+4"
transposes up by a major third.
cancel. "****SAVE NOW****" will appear on
the display while the operation is in progress,
and "»Completed!!«" will appear briefly
when the save operation has finished.
Details: The SAVE operation can only be executed
if the CARD parameter of the MEMORY
PROTECT function described on page 45 is
turned "off," and the WRITE PROTECT switch
of the MCD32 or MCD64 Memory Card loaded
in into the CARD slot is turned "off."
When an MCD64 Memory Card is used, the
bank to which the data is to be save can be
selected using the BANK function described on
page 42.
UTILITY SETUP
key to move the cursor to
41

Advertisement

Table of Contents
loading

Table of Contents