Setting The Midi Parameters; Making Overall System Settings (Local Control, Clock, Etc.) - System - Yamaha PF-1000 Owner's Manual

Making Global and Other Important Settings — Function

Setting the MIDI Parameters

In this section, you can make MIDI-related settings for the instrument. These settings can be stored all together from the
USER display, for future recall.
For general information and details about MIDI, see "What is MIDI?" (page 145).
The explanations here apply to step #3 of the procedure on page 122.
A
B
C
D
E
1
3
Call up the User display
and press this button to
save the newly edited
MIDI settings.
Up to ten setups can
be saved.
E
Press the [EXIT] button to return to the previous display.
ND
Making Overall System Settings (Local Control, Clock, etc.) — System
Call up the display as described in step 2 above.
For editing the Clock, Transmit Clock,
Receive Transpose, and Start/Stop
parameters.
Local Control
Turns the Local Control for each part on or off. When Local Control is set to "ON," the keyboard of the PF-1000 controls
its own (local) internal tone generator, allowing the internal voices to be played directly from the keyboard. If you set
Local to "OFF," the keyboard and controllers are internally disconnected from the PF-1000's tone generator section so
that no sound is output when you play the keyboard or use the controllers. For example, this allows you to use an
external MIDI sequencer to play the PF-1000's internal voices, and use the PF-1000 keyboard to record notes to the
external sequencer and/or play an external tone generator.
134
PF-1000
2 3 4 5 6 7
2
Call up the Edit display, then
select and set the desired
functions/parameters.
For details about each of the
MIDI edit displays, see the
following pages.
Preset MIDI Templates (Factory Set)
All Parts
F
Master KBD
G
H
KBD & Style
I
J
Song
Clock Ext.
1
Select the
desired
MIDI Accord 1
8
template.
MIDI Accord 2
MIDI Pedal 1
MIDI Pedal 2
MIDI OFF
Transmit all parts including Main, Layer
and Left.
The PF-1000 functions as a master
keyboard for controlling external tone
generators or other devices.
Transmit Upper and Lower keyboard
play instead of the individual parts
(Main/Layer/Left).
All Transmit channels are set to
correspond to the Song channels 1-16.
Use this to play the PF-1000 song data
with an external tone generator, or to
record your entire performance to an
external sequencer.
MIDI IN terminal receives MIDI clock
and PF-1000 synchronizes with a
external MIDI device.
An ideal setup for controlling the
keyboard voice and accompaniment
style with a MIDI accordion.
Chord and bass buttons on a MIDI
accordion control the accompaniment
style, as well as play the chord and
bass parts.
The MIDI pedal connected to MIDI IN
terminal controls the bass note of the
accompaniment.
The MIDI pedal connected to MIDI IN
terminal plays the bass part.
MIDI signals are neither sent nor
received.
The saved settings can be named (page 41)
or deleted (page 43) in the User page.
For editing the Local Control parameters.
For editing the Message Switch
parameters.