10: Erase Measure - Yamaha SY85 Owner's Manual

[SONG] → [A]~[H] → [SONG JOB] → [MENU] → 10:Erase Measure → [ENTER/YES]
the specified track.
Meas (First & last measure numbers)
192
SONG EDIT MODE /

10: ERASE MEASURE

Erases all note and event data from the specified measure or range of measures in
This job is not available when the rhythm track (track 9) is selected.
SONG`JOB`Erase`Measure`````````Meas`````
```````````````````````````````001ø`001`
F1 F2
CS1 CS2
Range: 001 ... 999
Controls: [CS7], [CS8], [-1] [+1], Dial
Use the GROUP [A] through [H] keys to select the track containing the
measures you want to erase (A = track1, B = track 2, and so on). The LED of
the selected track will glow red while the LEDs of all other tracks containing
data glow green.
Use the [CS7] and [CS8] sliders to select the numbers of the first and last
measures in the range of measures you want to erase.
Press [ENTER/YES] to begin the erase procedure. The following confirma-
tion display will appear:
SONG`JOB`Erase`Measure`````````Meas`````
Are`you`sure`?`````````````````001ø`001`
Press [ENTER/YES] again to confirm that you want to go ahead with the
erase operation, or press [EXIT/NO] to cancel.
When the data has been erased, "Completed!" will appear briefly on the
display.
An erase operation leaves the specified measures intact but blank.
SONG JOB
F3 F4 F5
CS3 CS4 CS5
F6 F7 F8
CS6 CS7 CS8