Other Functions; Voice Initialize; Performance Initialize; Voice Recall - Yamaha V50 Authorized Product Manual

Voice initialize

From single play mode or voice edit mode, press
to get the following display.
Function
Initialize a voice.
Explanation
This function sets a voice to an initial state, with
settings at maximum or minimum, producing the
simplest possible sound.
Press the below " > Init" to get the message
"Are you sure?". Press
initialized.
Note:
The voice function data will be initialized even if the
combine setting is "off".

Performance initialize

From performance play mode or performance edit mode,
press to get the following display.
Press the below " > Init" to get the following
display.
You can press the
the previous display.
Function
Initialize a performance.
Explanation
You can initialize to one of the following six types.
Just a single instrument
SNGL
Two
instruments sounding together
DUAL
Two
SPLT instruments split at B2/C3
Four instruments sounding together
4LYR
Eight instruments sounding together
8LYR

OTHER FUNCTIONS

and the voice will be
below " > EXIT" to return to
SEQ4 Setting for playing four instruments from
the sequencer
Setting for playing eight instruments from
SEQ8
the sequencer
Page 125 shows the initial settings for each of these.
Press a below the desired initialization setting,
and you will be asked "Are you sure?". Press
the performance will be intialized.

Voice recall

From single play mode or voice edit, press
get the following display.
Function
Recall a voice.
Explanation
This function recalls the voice you were most recently
editing. This is especially useful when, while editing
a voice, you select another voice by mistake before
saving your edited voice.
Press the below " > Recall" to get the
message "Are you sure?". Press
ously edited voice will be recalled.

Performance recall

From performance play mode or performance edit,
press to get the following display.
Function
Recall a performance.
Explanation
This function recalls the performance you were most
recently editing. This is especially useful when, while
editing a performance, you select another perform-
ance by mistake before saving your edited perform-
ance.
Press the below " > Recall" to get the
message "Are you sure?". Press and the previ-
ously edited performance will be recalled.
and
to
and the previ-
Utility functions 117