Replacing The Optional Pci-Express Card; Removing The Optional Pci-Express Card; Figure 5-1 Releasing The Pci-Express Card Release Lever - Fujitsu SPARC Enterprise T1000 Service Manual

5.1 Replacing the Optional PCI-Express
Card
5.1.1

Removing the Optional PCI-Express Card

Use this procedure to remove the optional low-profile PCI-Express (PCI-E) card from
the server.
1. Perform the procedures described in
2. Remove any cables that are attached to the card.
3. On the rear of the chassis, pull the release lever that secures the PCI-Express card
to the chassis (
Release lever
FIGURE 5-1
5-2 SPARC Enterprise T1000 Server Service Manual • April 2007
).
FIGURE 5-1
Releasing the PCI-Express Card Release Lever
Chapter 4.
PCI-E card