Base Station Or Remote Device Replacement - Harmony eXLhoist User Manual

Base Station or Remote Device Replacement

Overview
You can replace the Base Station part and the Remote Device part.
If you replace the Base Station or the Remote Device configured in Single, you will not lose your
safety configuration thanks to the maintenance / device replacement procedure but you need to
repeat the acceptance test to avoid incorrect wiring or incorrect behavior of the safety function.
If you replace the Base Station or the Remote Device configured in Tandem, you will lose your
safety configuration. You need to reinstall your configuration on the new Base Station or Remote
Device and then repeat the acceptance test to avoid incorrect wiring or incorrect behavior of the
safety function.
NOTE: For more product information, see the Maintenance / Device Replacement
EIO0000001505 12/2014
Safety
(see page 201).
79