Using The Wireless Remote Control System
Power OFF
Overview
This function switches OFF the Remote Device.
Triggering Procedure
Required conditions: The Wireless Remote Control System must be in STOP mode.
The "Power OFF function" is triggered in the following cases:
The OFF/STOP button is pressed.
No button pressed for more than the configured time-out: Auto Standby + Auto-OFF duration
time.
The Remote Device battery level is low.
Triggering procedure when the Wireless Remote Control System is in STOP mode:
Step
Action
1
Check that the Wireless Remote Control System is in STOP mode
2
Press only the OFF/STOP button more or equal than 2 s
Wireless Remote Control System In Power OFF Mode
Remote Device:
Reference
Description
ZART8L
ZART•D
ZART•D display from STOP mode to Power OFF:
128
All the LEDs are OFF.
The display is inactive.
The E-STOP LED is OFF.
EIO0000001505 12/2014