First Commissioning - Harmony eXLhoist User Manual

Installation and Wiring

First Commissioning

Overview
The following procedures describe the first commissioning of a Wireless Remote Control System
from a pack (Base Station + Remote Device).
The installation must be in accordance to the factory setting
In other case, refer to eXLhoist Configuration Software
procedure description
First Commissioning with 1 Base Station and the ZART8L
Step Action
1 Charge the Remote Device for more than 20 minutes.
2 Install the Base Station.
3 Power ON the Base Station.
4 Place yourself to an appropriate distance from the Base Station (around 10 m (32.8 ft)).
5 Press only the ON/START/Horn button more or equal than 1 s.
6 Wait for the E-STOP LED to be permanently ON.
Result: The Wireless Remote Control System is in STOP mode
First Commissioning with 1 Base Station and the ZART•D
Step Action
1 Charge the Remote Device for more than 20 minutes.
2 Install the Base Station.
3 Power ON the Base Station.
4 Place yourself to an appropriate distance from the Base Station (around 10 m (32.8 ft)).
114
(see page 137).
(see page 94).
(see page 201) and the Discovery
(see page 123).
EIO0000001505 12/2014