Auxiliary Function
Overview
In START mode, the auxiliary buttons activate the associated relays to command auxiliary action
(for example to command open and close grab).
Triggering Procedure
Required conditions: The Wireless Remote Control System must be in START mode
(see page
125).
Triggering procedure:
Step
Action
1
Check that the Wireless Remote Control System is in START mode.
2
Press an auxiliary button (10, 10+7, 11, 11+7, 12, 12+7, 13, 13+7, 14, 14+7, 15, 15+7)
(see page
Result: The associated relays are switched ON as long as the auxiliary button is pressed.
The Remote Device has no specific result.
Release
Release procedure:
Step
Action
1
Release the auxiliary button.
Result: The associated relays are switched OFF.
Specifics Information
In the eXLhoist Configuration Software, you can configure:
Motion/auxiliary buttons associated to relays
Motion/auxiliary buttons interlocking
EIO0000001505 12/2014
24).
(see page
Using The Wireless Remote Control System
(see page
194).
198).
133