Tested Architectures - Harmony eXLhoist User Manual

Architecture Examples

Tested Architectures

Overview
Schneider Electric provides the basis of tested architecture. You can adapt these architectures to
your individual requirements. NOTE: the architectures specified have been tested under actual
service conditions. Your specific application requirements may be different from those assumed
for these projects. In that case, you have to adapt the architecture to your particular needs. To do
so, you need to consult the specific product documentation that you may find necessary to modify
or adapt. Pay particular attention and conform to any safety information, different electrical
requirements, and normative standards that would apply to your modifications and/or adaptations.
Some or all of the architectures may contain recommendations of products that are not available
in your country or locality, or may imply or recommend wiring, products, procedures, or controller
logic and/or functions that are in conflict with your local, regional, or national electrical or safety
codes and/or normative standards.
REGULATORY INCOMPATIBILITY
Be sure that all equipment applied and systems designed comply with and conform to all
applicable local, regional, and national regulations and standards.
Failure to follow these instructions can result in death, serious injury, or equipment
damage.
The use and application of the architectures require expertise in the design of control systems.
Only you, the designer or integrator, can be aware of all the conditions and factors present during
installation and setup, operation, and maintenance of the machine or process, and can therefore
determine the associated equipment, the functions, the related safety provisions and interlocks
which can be effectively and properly used. When selecting control equipment, and any other
related equipment or software for a particular application, you must also consider any applicable
local, regional, or national standards and/or regulations.
216
WARNING
EIO0000001505 12/2014