Factory Setting Description - Harmony eXLhoist User Manual

Installation and Wiring

Factory Setting Description

General Parameters
General
Parameter
Protection
Detected Applicative Alarms
Base Station wiring:
Label
IN1
IN2
IN3
IN4
IN5
IN6
IN_COM
Safeguarding function (only for ZARB18•)
Base Station wiring:
Label
IN7
IN8
IN9
IN10
IN11
IN12
IN13
IN14
94
Label
Start access sequence
E-STOP RESET sequence
Standby Time-out (see page
Power saving Time-out
Horn duration (see page
Configuration File Transfer Password
Wiring description
Sensor input
Sensor input
Sensor input
Sensor input
Sensor input
Sensor input
Common output port (to be connected to the other side of
the dry contact connected to the IN1...IN6 inputs)
Wiring description
Limit switch input (for button 1)
Limit switch input (for button 1H)
Limit switch input (for button 2)
Limit switch input (for button 2H)
Limit switch input (for button 3)
Limit switch input (for button 3H)
Limit switch input (for button 4)
Limit switch input (for button 4H)
(see page 192)
(see page 192)
193)
(see page 193)
193)
(see page
Factory setting description
When IN7 is activated, the relay 1 is OFF
When IN8 is activated, the relays 1 and 3 are OFF
When IN9 is activated, the relay 2 is OFF
When IN10 is activated, the relays 2 and 3 are OFF
When IN11 is activated, the relay 4 is OFF
When IN12 is activated, the relays 4 and 6 are OFF
When IN13 is activated, the relay 5 is OFF
When IN14 is activated, the relays 5 and 6 are OFF
Factory setting value
Enable: 5, 6, 5, 6
Disable
15 minutes
15 minutes
2 seconds
183) Enable: 5, 6, 5, 6
Factory setting description
Overload pre-alarm
Overload alarm
Over wind pre-alarm
Over wind alarm
Over speed alarm
Generic alarm
-
EIO0000001505 12/2014