Edit A Connection - Harmony eXLhoist User Manual

eXLhoist Configuration Software

Edit a Connection

Overview
Follow the procedure to modify the communication settings for the connected device:
Step Action
1 Connect a Remote Device to the PC
From the main menu, select Communication → Edit Connection.
2
3 A window is displayed:
Select the COM Port.
4 Click Test.
5 If the communication is not established with the Remote Device, click Cancel and modify the
Modbus protocol settings.
Modbus Driver setting available:




6 Click OK to validate and close the window.
Click Cancel to close the window.
182
Baud rate: 19200 bauds
Mode (Data Bits): RTU (8 bits)
Even Parity
One Stop bit
(see page 165).
EIO0000001505 12/2014