Project Passwords Management - Harmony eXLhoist User Manual

Project Passwords Management

Overview
You can configure 2 passwords to the project:
The transfer password of the Configuration File

The project password

Transfer Password
The transfer password is asked before each Configuration File transfer.
After a modification of the system configuration

During a remote replacement

Follow the procedure to create or modified the transfer password:
Step Action
From the main menu, select Device → Transfer Password → Create Password.
1
Result: A window is displayed.
The default transfer password is: 5, 6, 5, 6
2 To modify an existing password, enter the previous password in the Old Password fields.
3 Enter the new transfer Configuration File password in the New Password and in the Confirm
Password fields.
NOTE: Password must be 2 digits up to 6 digits.
Digits allowed are 1, 2, 3, 4, 5 and 6.
4 Click OK.
The transfer password is stored in the project and in the Configuration File.
During configuration, use the keyboard of the PC to enter the transfer password.
In normal use (not connected to a PC), use the motion buttons 1...6 of the Remote Device to enter
the transfer password.
EIO0000001505 12/2014
(see page
(see page 207)
eXLhoist Configuration Software
140)
183