E-Stop - Harmony eXLhoist User Manual

E-STOP

Overview
The E-STOP function leads to go to the safe position of the Wireless Remote Control System when
the operator presses the E-STOP red mushroom button.
In E-STOP mode, the motion/auxiliary relays and the safety relays are OFF.
NOTE: The Remote Device cannot go to the E-STOP mode while the E-STOP function is not
operational (E-STOP LED is OFF).
Triggering Procedure
Step Action
1 Press the E-STOP button.
Wireless Remote Control System In E-STOP Mode
Remote Device:
Reference
ZART8L
ZART•D
Base Station:
Reference
Relays
LEDs
EIO0000001505 12/2014
Description
The START LED is OFF.

The E-STOP LED is blinking at a frequency of 1 Hz.

The STOP mode symbol is displayed.

The E-STOP symbol is permanently displayed.

The E-STOP LED is blinking at a frequency of 1 Hz.

The Remote Device generate a vibration for 3 seconds and generate the same thing

every 10 min until the E-STOP mode is released.
Description
The safety relays are OFF.

The motion/auxiliary relays are OFF.

The "Safety relay image" relay is OFF.

The STATUS LED is blinking.

The POWER LED is ON.

The COM LED is blinking.

Using The Wireless Remote Control System
121