Selector - Harmony eXLhoist User Manual

Using The Wireless Remote Control System

Selector

Description
There are 3 different configurations to use the selector auxiliary button:
Bridge selector (3 positions) in TANDEM configuration: to manage 2 bridges by using 2 Base

stations.
Trolley selector (2 or 3 positions): to manage 2 trolleys with one Base Station.

Hook selector (2 positions): to manage 2 hooks with one Base Station.

Triggering Procedure
Required conditions: The Wireless Remote Control System must be in STOP mode
(see page 123).
Triggering procedure:
Step Action
1 Check that the Wireless Remote Control System is in STOP mode.
2 Press the Selector button more or equal than 1 s to loop between the several positions.
Wireless Remote Control System Result
Remote Device:
For the ZART8L: the Selector LEDs are activated depending on the selection done.
For the ZART•D display: the Selector symbol indicates which bridge(s)/trolley(s)/hook(s) is(are)
selected:
Nb of position
2
3
Base Station relays:
The associated relay(s) is(are) switched ON.
In TANDEM configuration, when the Base stations 1 and 2 are selected, the motions asked with
the Remote Device are realized simultaneously by the 2 Base stations.
134
Description
EIO0000001505 12/2014