Table of Contents
Advertisement
ZART•D Replacement
Replacement of a ZART•D by an out-of-the-box One
Procedure to replace an out of work ZART•D by an out-of-the-box one:
Step
Action
1
Power ON the Base Station.
2
Place yourself with the Remote Device to an appropriate distance from the Base Station (around
10 m (32.8 ft)).
3
Press only the ON/START/Horn button on the Remote Device more or equal than 1 s.
Result: The Remote Device displays the ID list of detected Base Station:
4
Selects the ID of the appropriate Base Station with buttons 5 and 6.
5
Press the button 7 (trigger) to validate.
Result:
6
Select the validation cell (check symbol) with buttons 1 and 2.
EIO0000001505 12/2014
Maintenance / Device Replacement
207
Advertisement
Table of Contents
