Stop - Harmony eXLhoist User Manual

STOP

Overview
In STOP mode, the motion/auxiliary relays are disabled and the safety relays are OFF.
Triggering Procedure
The STOP mode is reached in the following cases:
The OFF/STOP button is pressed (the Wireless Remote Control System was previously in

START mode).
No button pressed for more than the configured time-out (Standby time-out) configured in

eXLhoist Configuration Software
Wireless connection lost (out of range for example).

Remote Device accelerometer triggering due to:

A shock on the Remote Device

The Remote Device fall

Triggering procedure when the Wireless Remote Control System is in START mode:
Step Action
1 Check that the Wireless Remote Control System is in START mode.
2 Press the OFF/STOP button.
Wireless Remote Control System In STOP Mode
Remote Device:
Reference
ZART8L
ZART•D
ZART•D display from START mode to STOP mode:
EIO0000001505 12/2014
(see page
Description
The START LED is OFF.

The E-STOP LED is ON.

The STOP mode symbol is displayed.

The E-STOP LED is ON.

Using The Wireless Remote Control System
191).
123