Horn - Harmony eXLhoist User Manual

Using The Wireless Remote Control System

Horn

Overview
From STOP mode to START mode, the "Horn" relay is switched ON for a predefined duration time.
In START mode, as long as you press the ON/START/Horn button, the "Horn" relay is switched
ON.
Triggering Procedure
Triggering procedure:
Step Action
1 Check that the Wireless Remote Control System is in START mode.
2 Press the ON/START/Horn button.
Result: The "Horn" relay is switched ON as long as the ON/START/Horn button is pressed.
The Remote Device has no specific result.
Release
Release procedure:
Step Action
1 Release the ON/START/Horn button.
Result: The "Horn" relay is switched OFF.
Specifics Information
The Horn duration during start can be configured in the eXLhoist Configuration Software
(see page 193).
136
EIO0000001505 12/2014