Connect A Remote Device To The Pc - Harmony eXLhoist User Manual

Connect a Remote Device to the PC

Introduction
The connection is made using the RJ45 to USB converter cable.
It is recommended to Power OFF the Remote Device before connecting it to the PC
Description
The figure illustrates the connection to a personal computer:
1 Personal computer
2 USB to RJ45 converter cable: TCSMCNAM3M002P
3 Remote Device
INOPERABLE EQUIPMENT
Always connect the communication cable to the PC before connecting it to the device.

Only use the Schneider Electric cable TCSMCNAM3M002P.

Failure to follow these instructions can result in equipment damage.
The PC does not supply the Remote Device. As long as the Remote Device is connected to the
PC, it is recommended to charge the remote
EIO0000001505 12/2014
NOTICE
(see page 143).
eXLhoist Configuration Software
165