ioLogik E1200 Series User's Manual
NOTE: The reset button restarts the server and resets all settings to factory defaults. Use a pointed
object such as a straightened paper clip to hold in the reset button for 5 sec. The factory defaults will
be loaded once the Ready LED turns green again. You may then release the reset button.
LED Indicators
LED
Power
Ready
Port 1
Port 2
State
Description
Amber
System power is ON
OFF
System power is OFF
Green
System is ready
Flashing
Flashes every 1 sec when the Locate function is triggered
Flashes every 0.5 sec when the firmware is being
Flashing
upgraded
Flashing
Cycle on/off period of 0.5 sec.; shows "Safe Mode"
OFF
System is not ready.
Green
Ethernet connection enabled
Flashing
Transmitting or receiving data
Green
Ethernet connection enabled
Flashing
Transmitting or receiving data
1-8
Introduction